|
| |
| RELIEF VALVES
Conbraco Industries Safety and Relief Valves
 |
10 Series
Brass and bronze ASME Section IV safety relief valves; 15 to 160
psig range, relieves up to 24,352,000 Btu/hr; brass, satin, or
polished chrome finish; for hot water boilers. Sizes: 1/2" to
2" |
 |
12 Series
Bronze, low pressure, ASME Section IV safety relief valves; 5 to
15 psig range; top guided; for medium to large steam boiler/heating
systems. Capacity: 2,500 to 4,100 lbs/hr. Sizes: 2",
2-1/2" and 3". |
 |
13 Series
Bronze, low pressure, ASME Section IV safety relief valves; for
small to medium steam boiler/heating systems; 15 psig top guided;
positive drainage of condensate from seat area; capacity: 407 to
1,9000 lbs/hr; three design configurations. Sizes: 3/4" to
1-1/2" |
 |
14-200 Series
Bronze, high-capacity, low pressure ASME Section IV safety
relief valves; for commercial and industrial grade high capacity
boilers; 5 to 15 psig; ASME certified capacity from 3,150 to 6,843
lbs/hr. Sizes 2", 2-1/2" and 3". |
 |
14-290 Series
Bronze, one piece vacuum relief valve, vacuum range from 6 to 30
inches of mercury; capacity from 355 to 943 SCFM at 10%
accumulation. Sizes: 2", 2-1/2" and 3". |
 |
15 Series
Brass air relief valves, protect compressors, air receivers and
gas lines; 15 to 250 psig; Capacity: 43 to 1,964 SCFM. Sizes:
1/4" to 1". |
 |
16 Series
Bronze pressure only relief valves for supply lines and cold
water storage tanks; 50 to 160 psig; 125 psig standard set pressure;
adjustable by-pass relief valve available. Sizes: 1/2" and
3/4". |
 |
16 ARV Series
Calibrated low cost static overpressure protection for cold
water applications. Preset at 100 psig. Adjustable in 25
psig increments from 50 to 175 psig. Bronze body. Inlet sizes:
1/2" to 3/4". Outlet size: 1/2". |
 |
16-601 Series
Thermal expansion valves protect plumbing fixtures and extend
water heater life. Compact, lightweight design; no special tools
required for installation. |
 |
18 Series
Bronze water heater temperature and pressure relief valves with
stainless steel spring; pressure settings to 150 psig; temperature
relief at 210° F; 15,000 to 850,000 Btu/hour. CSA temperature steam
rating. Pipe sizes: 1/2" to 2" with element lengths of
1", 4", and 8". Also available in an extended body
casting for thickly insulated water heaters. |
 |
119 Series
Cast iron flanged safety valves protect steam boilers and
pressure piping systems. Set pressures to 250 psig. Complies with
ASME Sections 1 and VIII, capacities are National Board certified.
Inlet sizes: 1-1/2" to 6" threaded and flanged.
120 Series
Identical to 119 Series, but offers stainless steel wetted
components. |
|
|
